Logo Smeg



EAN13: 8017709270384

90cm Island Downdraft Hood, Stainless Steel and black glass

More info Close

Energy rating: A

1 high performance motor, 270W

Electronic controls

Perimeter extraction

4 speeds, plus intensive (10min)

1 x 7W LED light

2 aluminium grease filters

Filter cleaning/replacement indicator

Automatic switch-off

Internal re-circulation possible

Non return valve

Vent outlet Ø 150mm

Nominal power 277W

Extraction Rate IEC 61591160290350430700
Noise Level dB(A) IEC 60704-2-134053546070

NB: Downdraft extractors can be installed anywhere in a kitchen but are ideal for when a hob is situated in an island unit. The extractor is installed under the worktop directly behind, or to the side of, the hob so that when it is not in use, it can be completely hidden from view. A Downdraft extractor can be vented or recirculated. When it is vented the ducting has to be passed under the flooring, below the cupboards or along the back of the cupboards - it is important therefore to decide on the hood before refurbishment work begins. The length of the ducting will affect the extraction performance, if it has to travel too far to go to an outside wall or there are too many turns in the ducting you are advised to recirculate the extractor.

This hood can be vented or recirculated with induction or ceramic hobs. However, when using with a gas hob, only venting out is possible.

NB: This model supersedes the KDD90VXE-2

When using with a gas hob, the hob must have a Maximum power of 12.4kW and 5 zones.


  • KITRBDD - Remote motor kit allowing you to position the motor up to 6mts away from the body of the hood
  • KITFCDD - Charcoal filter kit
  • RCKF2 - Remote control
  • SP150 - Simple ducting kit (150mm wide)
  • SP150FLAT - Comprehensive ducting kit (150mm wide)