Hood Stainless steel KBTI9L4VN | Smeguk.com

Hood Universal KBTI9L4VN

Product family
Hood
Hood Type
Decorative island hood
Aesthetics
Universal
Colour
Stainless steel
Hood width
90 cm
Energy efficiency class ( EEC)
A
  • Highlights
  • Features
  • Accessories
  • Download

AUTO-VENT 2.0 FUNCTION

This function can only be used when combined with a Smeg hob with wireless connectivity.

Auto-vent 2.0 allows the hood to operate automatically in response to commands from the hob, so the cooker hood will automatically adjust its extraction speed to match the hob settings.

Ducting or re-circulating

Most Smeg hoods offer the choice of ducting or re-circulating, so you can choose your preferred method.

  • Venting/ducting out provides optimum extraction of cooking fumes by expelling them outside, using a vent kit (available as an optional accessory) 
    This hood has 150mm vent outlet, so you can choose between the following options:

SP150 - Simple vent kit for hoods with a 150mm diameter vent outlet
SP150FLAT - Comprehensive vent kit for hoods with a 150mm diameter vent outlet

  • Re-circulating extracts the cooking fumes and passes them through active charcoal filters (available as an optional accessory), recirculating the cleaned air back into the room. To find out which charcoal filter your hood needs, see the accessory tab on the hoods specification.
Intensive extraction

A powerful intensive speed can be selected when quick extraction is needed, whether you’re creating a sizzling stir fry or a preparing an aromatic curry, even the strongest cooking odours will be removed in no time.

Clean air

The 24h air exchange function makes the hood work for 10 minutes every hour at very low speed and therefore without noise for a total of 24 hours in order to purify the air of the house, with low energy impact.

LED LIGHTING

These lights are long lasting, save money and perfectly illuminate the work surface below. They can be switched on regardless of the fans, and used simply to create ambience lighting in the kitchen.

AUTOMATIC SWITCH OFF

A special setting switches off both the extraction and the lights, after a predefined time, during which the hood keeps on purifying the air until it turns off automatically.

Dimmer switch

 

With the Dimmer function it is possible to increase or decrease the intensity of the hood light by holding down the light button.

Type

Product family: Hood
Hood Type: Decorative island hood
Hood width: 90 cm
Extraction: Ducted out or re-circulation possible
Electronic control: Yes
EAN code: 8017709305741

Aesthetics

Colour: Stainless steel
Finishing: Brushed
Aesthetics: Universal
Design: T flat
Material: Stainless Steel + Glass
Type of steel: Brushed

Programs / Functions

Intensive/turbo setting: when extra fast extraction is required. 24h: When selected this function refreshes the air for c. 10 minutes every hour over a 24 hour period, at minimum speed and an imperceptible noise level. Switch off automatically: A special setting, to run after the end of cooking for a pre-set time and then switch off automatically. ...
No. of speeds: 3
Intensive speed: Yes
24h air filter function: Yes
Time-setting options: Automatic switch-off
Auto-vent 2.0: Yes

Controls

Touch controls: Easy to use touch controls allow the appliance to be programmed at the touch of a button.
Control setting: Touch control
Led colour: White

Technical Features

... Filters: Model has filters to help remove grease from the steam emanating from the pans during cooking. ... Lights: All cooker hoods feature lights to illuminate the cooking area or add to the ambience of the kitchen. Warning light(s): to advise when filters need changing.
No. of lights: 2
Light type: LED
Light power: 7.3 W
Dimmer mode: Yes
Light color temperature range: 3000° - 5700° °K
Free outlet maximum capacity: 820 m³/h
Motor power: 275 W
No. of filters: 3
Anti-grease filters: Aluminium
Filter replacement indicator: Yes
Minimum distance from GAS hob: 650 mm
Vent outlet: 150 mm
Minimum distance from ELECTRIC hob: 650 mm
Non return valve: Yes

Performance / Energy Label

A: Product drying performance, measured from A+++ to D / G depending on the product family
Energy efficiency class ( EEC): A
Fluid Dynamic Efficiency class (FDEC): A
Grease Filtering Efficiency Class (GFEC): C
Lighting Efficiency Class (LEC): B
Annual Efficiency Consumption (AEChood): 49 KWh/year
Fluid Dynamic Efficiency (FDE): 35.4
Lighting Efficiency (LE): 23.5 lux/W
Grease Filtering Efficiency (GFE): 77.4 %
Air flow at minumum speed (Qmin): 280 m³/h
Maximum extraction rate: 626 m³/h
Intensive extraction rate: 78 m³/h
Airbourne acouistical A-weighted sound Power Emission at minimum speed (SPEmin): 47 dB(A)
Airborne acoustical A-weighted sound Power Emission at maximum speed (SPEmax): 69 dB(A)
Airbourne acoustical A-weighted sound power emission at boost speed (SPEboost): 73 dB(A)
Power consumption in stand-by mode (Ps): 0.38 W
Energy Efficiency Index per first cavity: 46.4
Measured air flow rate at best efficiency point (Qbep): 397 m³/h
Measured air pressure at best efficiency point (Qbep): 474 Pa
Measured electric power input at best efficiency point (Wbep): 175 W
Normal Power of the light system (Wl): 15 W
Average illumination of the light on the cooking surface (Emiddle): 348 lux
Sound power level at highest setting (Lwa): 69 dB(A)

Electrical Connection

Voltage: 220-240 V
Frequency (Hz): 50-60 Hz
Power supply cable length: 1500 mm

Speed 1

Extraction rate IEC 61591: 280 m³/h
Noise level IEC 60704-2-13: 48 dB(A)
Power: 154 W

Speed 2

Extraction rate IEC 61591: 415 m³/h
Noise level IEC 60704-2-13: 59 dB(A)
Power: 191 W

Speed 3

Extraction rate IEC 61591: 626 m³/h
Noise level IEC 60704-2-13: 69 dB(A)
Power: 238 W

Intensive speed

Extraction rate (IEC 61591): 778 m³/h
Noise level IEC 60704-2-13: 74 dB(A)
Power: 267 W

Logistic Information

Dimensions of the product (mm): 850x900x600
Width: 900 mm
Depth (mm): 600 mm
Product Height (mm): 850 mm
Net weight (kg): 27.100 kg
Gross weight (kg): 32.900 kg

Technical drawing

Instruction manual

Energy Label

Product Fiche EU

Product sheet

Brochure

3D file